Archives: Owners Manuals

Section 11: Banks Modules (If Connected) The “Banks Modules” menu allows you to configure and/or control modules that are connected to the iDash. Only connected Banks Modules

To enable/disable the shift light and set the trigger rpm: Select “Shift Light” from the main “MENU.” Select the first item in the “Shift Light” menu to

Section 9: Alerts To enable and configure gauge alerts: Select “Alerts” from the main “MENU.” Select a “Field #” with the parameter of interest. See Figure 9-1, A.

Section 8: Min and Max Values Each iDash keeps an updated record of key parameter minimum/maximum values for you to view or reset.  NOTE: Some vehicles report

Section 7: Diagnostics 7.1  Vehicle Diagnostics Trouble Codes (DTC’s) See the cause of your vehicle’s Check-Engine Light! With the iDash, you can read and clear vehicle manufacturer

Section 6: Data Logging Data logging saves (*CSV files) to any Micro SD cardw as “.CSV” files at 0.1 sec intervals. Up to 100 parameters can be

Section 5 Gauge Selection Parameter Selection To change iDash’s displayed parameters: Go to “Menu“and select “Gauge Selection.” See Step A, B. Select a “Field #” to change

Section 4: Layout The “Layout” menu allows you to select various gauge layouts for the Gauge Screen. Some special layouts become available when connected to a module.

Section 3: Software Introduction and Interface NOTE: It is recommended that you periodically check for software updates for your iDash here. Register your iDash to receive important

Table of Contents Disclaimer of Liability and Warranty End User License Agreement (EULA) Section 1: SAFETY PRECAUTIONS Section 2: Mounting and Connection iDash Section 3: Software Introduction