97278 AutoMind Programmer – Section 10 – Returning Your Vehicle to Stock

Part #s 66410, 66411, 66412

Banks AutoMind® Programmer 1999-2019 Ford, Diesel/Gas (except Motorhome or Cab & Chassis)
1999-2016 Chevy/GMC Trucks Diesel/Gas, (except Motorhome or Cab & Chassis)
1998-2014 Dodge, Ram and Jeep, Diesel or Gas (except Cab & Chassis)

Please read through the following instructions thoroughly before starting your installation. If you have any questions please visit our Support Page.

Section 10: Returning Your Vehicle to Stock

Before taking your vehicle into a service center, return your vehicle to stock. The service center might reprogram your vehicle with an updated program without your knowledge. If you do not use this device to return your vehicle to factory stock and your vehicle is reprogrammed by the service center, the programmer will no longer be
able to program your vehicle.

Step 1

Plug the device into the OBDII port.

Step 2

Enter the Tuning Menu by pressing OK.

Step 3

Turn ignition on, but do not start the engine.

Step 4

Select the Stock option from the list.

Step 5

Install the Stock File by pressing OK.

Step 6

Allow the stock settings to be re-installed.

Step 7

Turn the Ignition Off. Press OK to continue.

Step 8

Press OK to return to the main menu.