iDash

Part Number 63397 Fits the driver side upper A-pillar bolt found in:• 2007-2013 Chevrolet Avalanche• 2007-2014 Chevrolet Silverado• 2007-2014 Chevrolet Suburban• 2007-2013 Chevrolet Tahoe• 2007-2014 GMC Sierra• 2007-2013 GMC Yukon• 2007-2013 GMC Yukon XL Installation Guide What’s Included If anything is missing, please call us at 800-601-8072 immediately! A Pillar Removal 1. Before working on […]

2. Connect the 6-Pin Female Banks Bus Y-cable (supplied with the kit) from the PedalMonster module to the iDash. 3. Connect the OBD-II Cable from the vehicle’s OBD-II port to iDash’s 4-pin port. Do not secure the PedalMonster yet. You’ll need access to the “[b]” Banks button on the front.

Section 1: Starting Installation 2. Locate the connector at the top of the accelerator pedal. While some connectors face the driver, others may face up toward the dash or to the left. 3. If the connector has a locking tab, slide the locking tab outwards to unlock. This will expose a black plastic button you […]

Part Number 63397 Fits the driver side upper A-pillar bolt found in:• 2025-2026 Toyota 4Runner Installation Guide What’s Included If anything is missing, please call us at 800-601-8072 immediately! A Pillar Removal 1. For conventional i-FORCE gas models, start by disconnecting the negative battery terminal. For i-FORCE MAX Hybrids, do not touch the 12V or […]

Installation Guide What’s Included iDash Stealth PodAlcohol Prep WipeAlignment Template If anything is missing, please call us at 800-601-8072 immediately! Tools Required Plastic pry toolSocket wrenchT25 Torx BitT27 Torx Bit10mm SocketDrill Install Prep and Trim Removal 1. Remove the interior battery access cover Use a T25 torx bit or key to remove the two screws. […]

Part Number 63391 Fits the driver side upper a-pillar bolt found in:• 2014-2024 Toyota 4Runner Installation Guide What’s Included If anything is missing, please call us at 800-601-8072 immediately! A Pillar Removal 1. Start by disconnecting the negative battery terminal. 2. Pull back about 2 feet of weather stripping from the door frame. It is […]

Part Number 63393 Fits the driver side lower a-pillar bolt found in:• 2024-2026 Jeep Wrangler JL / Gladiator Installation Guide What’s Included If anything is missing, please call us at 800-601-8072 immediately! Step-by-step Installation 1. Start by disconnecting the negative battery terminal. 2. On hybrid vehicles with start-stop, there may be two terminals to remove. […]

Part Number 63390 Fits the driver side a-pillar vent found in:• 2021-2026 Ford Bronco Installation Guide What’s Included If anything is missing, please call us at 800-601-8072 immediately! Step-by-step Installation 1. Open the driver’s side door and locate the vent that is on the A-pillar. 2. With the supplied pry tool, carefully slip one end […]

Part Number 63390 Fits the driver side dashboard vent found in:• 2023-2025 Chevy Colorado• 2023-2025 GMC Canyon Installation Guide What’s Included If anything is missing, please call us at 800-601-8072 immediately! Step-by-step Installation 1. With the included metal pry tool, pop off the driver-side window defroster vent. Press down on the soft dashboard trim, slide […]

Part Number Description QTY 45103 Banks AFR Module 1 45104 Wideband O2 Sensor 1 52248 O2 Weld Bung 1 62010 Cable Tie 8 Installation Note The Banks AFR module and O2 sensor are intended to be installed and used by experienced mechanics, technicians, automotive enthusiasts, or race teams. Installation requires the use of a welder […]