97278 AutoMind Programmer – Section 8 – Advanced Tuning Options
INSTALL INSTRUCTIONS
Part #s
66410, 66411, 66412
Banks AutoMind® Programmer
1999-2019 Ford, Diesel/Gas (except Motorhome or Cab & Chassis)
1999-2016 Chevy/GMC Trucks Diesel/Gas, (except Motorhome or Cab & Chassis)
1998-2014 Dodge, Ram and Jeep, Diesel or Gas (except Cab & Chassis)
Please read through the following instructions thoroughly before starting your installation. If you have any questions please visit our Support Page.
Section 8: Advanced Tuning Options
Change the power level of your vehicle using custom options and settings.
Not all features are available on every make, model, and engine.
Do not remove or bump the OBD-II connector during any programming sequence. If you do, the vehicle may not start.
Do not program your vehicle while parked in unsafe locations including heavy traffic or places without cell phone service.
Step 1
Plug the device into the OBDII port.
Step 2
Enter the Tuning Menu by pressing OK.
Step 3
Follow the onscreen instructions.
Step 4
Select a tuning level.
Step 5
Press OK to customize options.
Step 6
Select the available options for your vehicle to adjust to your requirements.
Step 7
Select Continue when done modifying.
Step 8
Press OK to install the program file.
Step 9
Allow the program files to be installed.
Step 10
Turn the ignition off.
Step 11
Press OK to return to the main menu.